NEWS & BLOGQ & A
You are here: Home » NEWS & BLOG » Plastic Crusher Winter Maintenance Tips
Plastic Crusher Winter Maintenance Tips

The plastic crusher should be fixed to the cement base. If the workplace is changed frequently, the crusher and motor should be mounted on a base made of angle iron to prevent the plastic crusher from being damaged by moving back and forth.

Product description

Safety is an eternal topic in life. Whether it is a manufacturer or an individual company, everything is based on safety. When peace and development become the theme of the times, security issues become even more important. A peaceful and stable life requires security, economic development requires security, and the development of the times requires security.
The plastic crusher should be fixed to the cement base. If the workplace is changed frequently, the crusher and motor should be mounted on a base made of angle iron to prevent the plastic crusher from being damaged by moving back and forth.
2. Start-up inspection of plastic crusher
Before starting, you must check whether the part of the unit’s connecting bolts are tightened, whether the belt is tight and the power cord is good. Whether the motor shaft is parallel to the shredder shaft. Check the blade to see if the screen is in good condition.

Plastic Crusher
3. Precautions after starting the plastic crusher
After starting, first idle the device for 2-3 minutes to check if the rotor is turning correctly and the sound is normal. It only works when the speed is stable at the rated speed.
4. Operation requirements of plastic crusher during operation
In the work, first of all, we should pay attention to the working condition of the equipment. Secondly, the feeding should be uniform and uniform, and the materials should not be mixed with other impurities to prevent clogging and equipment damage. Do not close immediately after work, idling for 2-3 minutes, so that the equipment inside the machine is completely discharged before turning off the equipment.
5. Inspection and maintenance of plastic crusher after shutdown
After the plastic crusher is closed, the wearing parts should be inspected for wear and tear. If the wear is serious, it should be replaced in time, in the same direction or in the same direction. When replacing a new blade, replace the entire blade at the same time instead of replacing the old blade with a single blade. When the plastic breaker is used for 300 hours, the bearings should be cleaned and the oil changed.

Technical parameter
Video Show
Related products
Contact us

Leave a Reply

Your email address will not be published. Required fields are marked *

Zhangjiagang Qinfeng Machinery Co.,Ltd
Tel: +86-512-58200823
Fax: +86-512-58200820
Mobile: +86-13951133895
ADD: NO.358,Jiangjin road zhangjiagang city,Jiangsu province,China.
E-mail: sales@qinfengmachine.com / 468921@qq.com
Contact us
Tel: +86-512-58200823
Fax: +86-512-58200820
Mobile: +86-13951133895
ADD: NO.358,Jiangjin road zhangjiagang city,Jiangsu province,China.
E-mail: sales@qinfengmachine.com / 468921@qq.com