Small Shredder
Product description

Small Shredder Description:

Model:WT series
WT series small shredders can be used for the recycling of HDPE, PP-R, PVC, ABS, and other plastic pipes, profiles, tubes, and profiles. After years of research and development by our company, we have improved our technology and made breakthroughs in innovation. The new generation of small-scale shredder developed greatly improved the working efficiency. The tool is quenched with imported alloy material. Improve the hardness of the blade surface to enhance the life of the tool. The cutter head adopts a square square arc structure design to promote the contact area between the cutter and the raw material, and can be recycled, greatly improving the service life of the cutter head. The size of the shredded material of the small-sized single-axis shredder is between 5-12cm, and then it is crushed by the secondary conveyor and the crusher to achieve the requirements for granulation and the granulation production is directly carried out.
Small shredder consists of motor, hardened surface reducer, rotary cutter shaft, imported movable knife, fixed knife, frame, base, box, hydraulic cylinder, oil pump, cylinder, work platform and other major structures.

Small Shredder Introduction:

When the shredder is working, the material is propelled by a hydraulic cylinder and is equipped with a clamping device. Using Siemens programming control system, can be automatically controlled, with start, stop, reverse and overload automatic reverse control function, with low speed, high torque, low noise and so on.
The small shredder rotary cutter shaft is equipped with a detachable embedded movable knife, the number of movable cutters is determined according to different models and the size of the rotary cutter shaft, and the movable cutter is a four-cornered useable knife, which is replaced with a blunt rear and removed. Angle, until the four sides are blunt and then sharpen the knife, because it is a claw-type movable knife, rotary cutting, and fixed knife and moving knife is imported SKD11 material, after heat treatment hardness of HRC60 ° or more, so long life, cutting ability Strong, high productivity, the normal use of more than 1,000 tons only need to sharpen.

Application of shredder

  • Industrial wasteIndustrial waste


  • SHREDDER ROTORROTOR: Various rotor configurations available for processing a wide range of materials. Blades are made from hardened DC53 steel, the blades can be turned 4 times before changing.
  • SHREDDER GEARBOXGEARBOX: Water cooled gearbox guards against overloading. Hardened teeth on the reducer.
  • SHREDDER SHOCK ABSORBESHOCK ABSORBE: Absorbs vibrations caused by the shredding of the material. This protects the machine and its various parts from damage.
  • SHREDDER BEARING SEATBEARING SEAT: Protective bearing covers to avoid foreign contamination entering the bearing housing. Grease points to release oil at intervals to increase service life.
  • SHREDDER CECE CERTIFIED: Safety devices in line with European CE Certification.
  • SHREDDER RAMRAM: The hydraulic ram pushes material against the rotor.
  • SHREDDER SCREENSCREEN: Various screen sizes.
  • SHREDDER HYDRAULIC STATIONHYDRAULIC STATION: The ram pressure and timing can be adjusted to suit different materials. From WT40 series and above the machine can be fitted with wind cooled two-speed pump.
Technical parameter
Video Show
Related products
Contact us

Leave a Reply

Your email address will not be published. Required fields are marked *

Zhangjiagang Qinfeng Machinery Co.,Ltd
Tel: +86-512-58200823
Fax: +86-512-58200820
Mobile: +86-13951133895
ADD: NO.358,Jiangjin road zhangjiagang city,Jiangsu province,China.
E-mail: /
Contact us
Tel: +86-512-58200823
Fax: +86-512-58200820
Mobile: +86-13951133895
ADD: NO.358,Jiangjin road zhangjiagang city,Jiangsu province,China.
E-mail: /