NEWS & BLOGQ & A
Wood Shredder Installation Matters
What should be paid attention to when installing the wood shredder? Before starting the machine, it is necessary to check whether the partial bolts of the wood shredder can be tightened, whether the tension of the transmission belt is suitable, whether the power cord is good, the motor shaft and the wood powder shaft Can it be parallel; check whether the grinding machine of the wood powder machine is good, whether the aperture of the screen block is suitable and whether it is damaged. Drag the belt by hand to see if the spindle rotation is sensitive, with or without a card, bump and friction.
Product description

What should be paid attention to when installing the wood shredder? Before starting the machine, it is necessary to check whether the partial bolts of the wood shredder can be tightened, whether the tension of the transmission belt is suitable, whether the power cord is good, the motor shaft and the wood powder shaft Can it be parallel; check whether the grinding machine of the wood powder machine is good, whether the aperture of the screen block is suitable and whether it is damaged. Drag the belt by hand to see if the spindle rotation is sensitive, with or without a card, bump and friction.
1. Always pay attention to the operation status of the wood shredder at work, and the feeding should be averaged to prevent the blockage of the car and not overload the task. If you find vibration, noise, high temperature of the bearing and the body, and outward spray, you should immediately stop and reflect, and remove the sustainable task ahead of the problem.
2. The wood shredder blade is an important wearing part. After the wear, the angle of the same direction is interchanged or the angle of the head is interchanged. The whole group of hammers must be interchanged at the same time. When changing the new hammer, the whole set of hammers should be Change, you can not use a single hammer to replace the old. The screen is also a wearing part. If the partial screen is damaged, it can be riveted. If it is damaged, it needs to be replaced with a new one.

Wood Shredder
3, after booting, first make the equipment idling 2 & mdash; 3 minutes, reflect on whether the rotor steering is correct, the sound can be normal. As long as the bump is turned at the extra speed, the task can be performed.
4, micro-sports personnel do not wear gloves, when the infarction, it is strictly prohibited to reach into the filling bucket, feeding should be standing on the front of the crusher, in order to prevent rebound debris from hurting the face, do not stop immediately after the task is completed, should be idle 2 , 3 minutes, in order to completely discharge the material inside the machine. The cleaning and maintenance tasks should be stopped after the shutdown. The above is the precautions when using the wood shredder. Please pay attention to these details when using it to better use the machine and improve efficiency.

Technical parameter
Video Show
Related products
Contact us

Leave a Reply

Your email address will not be published. Required fields are marked *

Zhangjiagang Qinfeng Machinery Co.,Ltd
Tel: +86-512-58200823
Fax: +86-512-58200820
Mobile: +86-13951133895
ADD: NO.358,Jiangjin road zhangjiagang city,Jiangsu province,China.
E-mail: sales@qinfengmachine.com / 468921@qq.com
Contact us
Tel: +86-512-58200823
Fax: +86-512-58200820
Mobile: +86-13951133895
ADD: NO.358,Jiangjin road zhangjiagang city,Jiangsu province,China.
E-mail: sales@qinfengmachine.com / 468921@qq.com